Boat Plans Australia
Mike Vermeersch in Ravenna Ohio turned over his Didi 950 hull a couple of weeks ago and sent me a video of the process. He turned the hull with the help of a few friends, using the spit roast method and a pair of engine hoists.
With the hull settled in her new cradle, Mike has settled into doing the epoxy fillets and coatings, ahead of starting on the interior joinery.
Epoxy coatings progressing on Mikes Didi 950 |
The lifting keel version uses a keel support box of identical footprint to that of the fixed keel version. The difference is that the keel has to slide through where the motor sits in the fixed keel boat, so the motor has relocated to below the front of the cockpit and has a saildrive. The keel support box for this version has the casing built into it, with a flange at the top edge for bolting the keel securely in the down position. In the raised position, the keel is at approximately the same level as the bottom of the rudders. Draft is 2.35m (79") with the keel down and 1.15m (39") with the keel up.
The keel is lifted by means of a tackle, with the tail led to a dedicated winch that is recessed into the galley counter. This is a simple system, without the waterproofing and complication issues of leading it to a cabin roof winch.
Accommodation of the lifting keel version of the Didi 950 |
To see our full range of designs to a wide range of concepts and materials, please go to http://dixdesign.com/.
Do you find information about Boat Plans Australia are you looking for? If not, below may help you find more information about the Boat Plans Australia. Thank you for visiting, have a great day.