Boat Plans Pdf | Beautiful Shearwater 45 Available

Boat Plans Pdf

The Shearwaters are boats of which I feel proud. They are very pretty, they are capable in all weather conditions and they are fast. The Shearwater 39 has an enviable reputation as one of the most seaworthy designs ever to come out of South Africa, a country that is known to have some of the most severe sailing waters in the world. These boats turn heads wherever they go, partly because they are so pretty and partly because they sail past many boats that look faster.

Shearwater 39 "Shoestring III" on launch day.

The Shearwater 45 grew naturally out of the reputation that was earned by the 39 and was developed out of the moulds of the 39. It has more length with no freeboard increase and with very little extra beam. The resulting boat is very sleek and gracious to look at and it gained a surprising boost of speed that allows it to outsail most boats of equal size and many that are up to 25% longer. In gaining that speed it has lost nothing of the seaworthy characteristics of the smaller sister. What it did gain is greater responsiveness and fingertip steering due to the change from a semi-balanced transom-hung rudder to a balanced spade rudder.

Shearwater 45 sailing on Chesapeake Bay.

We have good examples of both of these designs available on our brokerage pages. The most recent to come available is the gorgeous 45 "Maggy May". She is lying in the Caribbean and is fully equipped, maintained in top condition and ready to cruise to anywhere that you care to go. She is only being sold due to serious illness of the owner. To view "Maggy May" and the other Shearwaters that we have listed, go to http://dixdesign.com/brokerdd.htm.

Please visit our website at http://dixdesign.com/.

Do you find information about Boat Plans Pdf are you looking for? If not, below may help you find more information about the Boat Plans Pdf. Thank you for visiting, have a great day.

Read more

Boat Plans Nz | Cape to Rio Race Starts Tomorrow

Boat Plans Nz

It has been a long slog to get here and, strange as it may seem, even now I am not sure where "here" is. We need to be on the start line in Table Bay at 14h00 South African Time (UTC+2) and have been working toward that goal for a year. Now that we are almost there time-wise, we have had all sorts of issues popping up to try to trip us and prevent our participation. Each time that we side-step an issue, another appears in its place.

These are not problems that are directly related to the boat, neither are they related to most of the crew. I cant say what they are but they have been a major distraction in our preparations, detouring our efforts and moving our focus from much needed work into stuff that really should not be on our minds at this stage of preparations. These issues sap energy and drain enthusiasm. It takes effort to maintain optimism, which is normally self-fortifying.

We expect to be on the start line tomorrow and will be deeply disappointed if we should be prevented from going. Only time will tell whether or not we will be there. Watch for the yellow boat if you are able to watch it live, or maybe recorded live (whatever that means).

From here on I will not be posting on this blog live until after the race is over and I return to USA. I will be sending email updates to my wife, Dehlia. She will be posting on the blog but it will probably be without photos. Our Internet connections via satellite phone will be too slow to transfer photo files. If we have something really special to show then we may make an exception.

So please follow us via the tracking link on the race website at http://cape2rio2014.com. This is not a clickable link, so please copy and paste into your browsers address window.

Do you find information about Boat Plans Nz are you looking for? If not, below may help you find more information about the Boat Plans Nz. Thank you for visiting, have a great day.

Read more

Plywood Boat Plans Australia | Cape Henry 21 Launched in Croatia

Plywood Boat Plans Australia

Dean Ivancic lives in Porec, Croatia. He bought plans from us a few years ago for the Cape Henry 21. He has been working steadily on his boat and reported to me today that he launched her in April. He has sent me some rather nice photos of her under sail. She is still incomplete down below but has all that is needed to sail.

She is named "Scintilla", Italian for "spark", also the meaning of "Iskra", the Croatian name of Deans youngest daughter.

We wish Dean and his family lots of fun and adventures in their Cape Henry 21.

"Scintilla" on one of her first outings.

Pretty from any angle.

Dean has done a nice job of building "Scintilla".

The Cape Henry 21 is surprisingly quick and has delightful manners. These boats prove that a boat doesnt have to be ugly to be fast.

For more on this design and others in our range, go to http://dixdesign.com/.

Do you find information about Plywood Boat Plans Australia are you looking for? If not, below may help you find more information about the Plywood Boat Plans Australia. Thank you for visiting, have a great day.

Read more

Pontoon Boat Plans Aluminum | Georgetown Wooden Boat Show This Weekend

Pontoon Boat Plans Aluminum

Saturday 19th October is Georgetown Wooden Boat Show, on the waterfront of Georgetown South Carolina. We will have our prototype Paper Jet on display, among the land exhibits on Front Street.

This year we will enjoy the company of two other Paper Jets, local to that area. Bob Turner of Pawleys Island has just completed his boat and Ted Bullock of Barrier Island Boatbuilders in Charleston will exhibit his one, which is nearing completion.

Paper Jet #007. Numbers are now approaching 80 boats.

The Paper Jet is very different in concept from most other boats that will be on display. The very light but robust construction and thoroughly modern image of these boats provides a sharp contrast with the generally classically styled boats, of mostly traditional construction methods, of other exhibits.

If you are within day-trip range of Georgetown, please come by to talk about the Paper Jet and any other of our wide range of designs that might interest you.

The red boat in the photo above is for sale. It was professionally built with nice detailing. If you are all-thumbs when it comes to woodworking then this boat can provide a painless route to getting afloat in a light and fast performance dinghy. It wont be at the show but we will be able to give details and put you in contact with the seller.

To see our full range of designs, please visit http://dixdesign.com/ .

Do you find information about Pontoon Boat Plans Aluminum are you looking for? If not, below may help you find more information about the Pontoon Boat Plans Aluminum. Thank you for visiting, have a great day.

Read more

Canoe Boat Plans | Photos for 2014 Calendar

Canoe Boat Plans

I am starting work on our 2014 calendar and I am still looking for a few more photos to complete the 12 months plus cover that I need. If you have any nice  photos of your boat of our design that you would like to be featured in this edition, please send them to me. The boat doesnt have to be sailing or even in the water yet. If the photo is clear and interesting then we might use it. It also needs to be at least 300dpi resolution, preferably more.

Cover from 2013 Calendar, with Italian Dix 38 "Imagine".

August photo, Challenger 13 in Lithuania.

Boat size is not important, as long as the photo is interesting and high quality. We even have our smallest design, the Dixi Dinghy in the 2013 calendar in a photo that caught my attention.

To see our range of boat designs, please go to http://dixdesign.com/ .

Do you find information about Canoe Boat Plans are you looking for? If not, below may help you find more information about the Canoe Boat Plans. Thank you for visiting, have a great day.

Read more

Yacht Boat Plans | Why Would Anyone Build a Boat

Yacht Boat Plans

Why would anyone build a boat? What kind of question is that for a boat designer to ask? I ask it because there are so many people who ask it in all seriousness. They ask it because they really cant understand why anybody would build a boat instead of buying one. There are so many boats out there that are available and can be acquired with so much less effort, new boats, good used boats, boats that have been damaged in weather events, tired boats that can be rejuvenated and almost dead boats that can be resuscitated.

There is no single answer to that question, there are many reasons why people build boats for themselves and each builder no doubt has a bunch of these reasons rolled up inside whatever it is that drives him to build his boat.

A reason that is common to all of the builders is passion. They have a passion to create a boat, to create something that would never have existed were it not for them and their desire to do this. Having been there myself many times, I can attest to the fantastic feelings that flood through when we first put that new boat into the water and then to give it life by hoisting sail or opening the throttle for the first time. If you think about how wonderful you felt when you first used a new boat that you had bought, doing the same in a boat that you have created with your own hands intensifies those feelings in ways that cant be described.

Petr Muzik built his Shearwater 39 then circumnavigated in his 70s.

It is that passion that also drives many of the decisions that are made during the build project. It drives them to do quality work because they want to feel pride in the final product. They want their creation to show well when seen by others, to be seen as a thing of beauty. Those who have never thought to build a boat themselves look at it and say "Wow, did you build that?".

Financial restraints are behind many amateur boatbuilding projects. If you need or want a new (as in not pre-owned) boat that costs double the money that you can afford to put into it, then the only route to get it is to build it yourself. I have never calculated ahead of my boatbuilding projects how much they are going to cost. Each time I have just dived right in and started, then kept going to the end. That was when I found out what the total cost was and was able to compare with what it would have cost me to buy an equivalent new pop-out production boat. Each time the cost of my fully-equipped boat was around 45% of the cost of a base-package for a production boat of similar size and concept.

Those who dont get it say "It cost you a lot more, you havent priced in your labour hours, which must be priced at your professional rate of pay". No, we dont price our labour into the project and no, we should not price it at the rate that we receive in our paying jobs, whatever they may be. The project serves as a hobby, as recreation that helps us to recover from a tough week working for someone else. It helps to keep us motivated and able to take on the world. The alternative of working very extended hours at our paying jobs to generate the funds to pay someone else to build our boat brings with it a risk of getting burned out in the process.

Andrew Morkel built his Argie 15. Now he and his family are learning to sail in it.

Many people who build big boats for long distance cruising want to build it themselves to give them confidence in the strength of the boat. They know that they will be sailing their boat on very remote waters, far from rescue services and possibly with their beloved family aboard. The safety of all depends on the quality of the build and they dont want to leave that to people whom they dont know. They have vested interest in doing everything in the best manner possible, so they want to do it themselves. In the process they garner the side benefit of knowing intimately how the boat works, where all of the important parts are, how to get to every seacock or filter in a hurry when dictated by some emergency that may develop onboard. They know exactly how to repair everything onboard because they installed it in the first place. They are likely to lay out all aspects in a very sensible and logical manner because they will have to maintain it themselves. At sea in a storm is not the best time to be trying to track down plumbing or electrical faults in systems that are overly obscure because the person who installed them before the hull liners or lockers were installed didnt consider the problems of working on them in the completed boat.

Others build their own boats because they want something different,  a boat that will stand out from the crowd on marinas, at sea and in distant anchorages. They add personal styling features to fit their own characters and they choose joinery detailing such as is not available from production boatbuilders.

Sergey Federov built his Hout Bay 33 to a very high standard.

Some people choose to build a boat purely for the hobby benefit. They enjoy the build more than using the boat, so the project will be drawn out interminably. They produce exceptional quality in the process but will probably sell the boat when completed or soon after.

It has been said many times that the happiest days of a boatowners life are when he buys and when he sells the boat. The exception to that cliche is the boatowner who has built his boat himself. There is so much of the builder wrapped up in that boat, in the form of blood, sweat and tears, to say nothing of chunks of skin and body hair, that he and the boat have an affinity and  intimacy that is unknown to those who buy their boats. I have felt very sad when selling each of the boats that I have built, far from the happiest days of my life.

It has also been said many times that boatbuilding is a disease and when you have had it, you will experience periodic relapses. I have to agree with this one, I have had numerous relapses. I cant say that I have suffered relapses, as would apply to most diseases, I have enjoyed those relapses too much to convince my wife that I have suffered in any way. And this is the way that most amateur boatbuilders feel. Visit any of the many boat shows that cater for amateur boatbuilders and you will see for yourself how much they love what they do and just how much passion they build into their projects.

To see our range of designs, for amateur or professional boatbuilding, please go to http://dixdesign.com.

Do you find information about Yacht Boat Plans are you looking for? If not, below may help you find more information about the Yacht Boat Plans. Thank you for visiting, have a great day.

Read more

Boat Trailer Plans Australia | Our Boat for Cape to Rio 2014

Boat Trailer Plans Australia

A few weeks ago I announced that we will sail in the Cape to Rio Race in January. If you missed it, you can read it here. Now I would like to tell a bit more about the boat.

Her name is "Black Cat" and she is very special in my life. I designed her, I built her in my garden and I have sailed her across the South Atlantic three times. I have also raced and cruised her for many, many miles on the notorious Cape of Good Hope waters and she formed the foundation of my best selling range of boat designs. She is the prototype of the Didi 38 design and older sister to designs from the DS15 (Didi Sport 15) through to the DH550 .

"Black Cat" with her crew on launch day.

 I started concept sketches during the 1993 Cape to Rio Race on the Shearwater 39 "Ukelele Lady". "Ukelele" is very comfortable and carried us across the Atlantic in 29 days, excellent for a cruiser.  Still, I resolved part-way across  to do the next race on a boat of my own, which would be better able to take advantage of the downwind surfing conditions found on this race.

The new boat was to be cold-moulded wood. It was to be very light, with a big rig and deep bulb keel for high performance. Light and beamy boats are uncomfortable at sea and I sometimes get seasick, so I designed her relatively narrow for comfort. Narrow beam would also make her even faster.

I had nearly 3 years to build but I had a very big problem, I had no money to start. It was nearly a year before I had money to start building. Now the problem became a lack of time to build the cold-moulded boat, so I had to find an alternative solution that would be quicker to build.

My solution was to develop a method for building a rounded hull shape from plywood, using a radius chine form developed from my metal designs. I needed it to be mostly sheet plywood for fast construction but a rounded shape for performance, aesthetic and resale value reasons.

The resulting boat was 4 tons displacement in measurement trim and with 50% ballast ratio. She turned out to be clean, simple, pretty and a delight to sail. In two Cape to Rio Races she carried us across the Atlantic in 21 days in vastly different conditions. In one race she topped out as 18 knots and covered 250 miles in 24 hours. On the other her top speed was 22 knots but her 250 mile record went unbroken.

Where did her name come from? She is, after all, a yellow monohull and not a black catamaran. Black Cat is the top-selling peanut butter brand in South Africa and they sponsored her in the 1996 race. The kids knew her as the "Peanut Butter Boat" and her big  Black Cat spinnakers attracted a lot of attention.

Moving well in very light breeze.

She is quick on all headings in light breezes. The above photo was taken while racing on St Helena Bay in only 3-4 knots of breeze, a race in which she took line honours with a very comfortable lead over the 2nd placed boat, also a 38ft cruiser/racer.

She also loves to run free in a strong breeze. From cracked off on a fetch through to a run, she flies in strong conditions. Like me, she loves to surf. I surfed her at 22 knots down a very big wave mid-Atlantic after a storm.

Yet, she remains a home-built plywood boat and I look forward to spending 3 weeks with her and her crew as we cross the ocean once again. In the next few weeks I will write about the crew who will keep me and "Black Cat" company on this voyage.

To see our full range of designs, please visit http://dixdesign.com/ .

PS. Entries for the race currently stand at 26 boats, with another 19 pending. The race website is at http://www.cape2rio2014.com/ .


Do you find information about Boat Trailer Plans Australia are you looking for? If not, below may help you find more information about the Boat Trailer Plans Australia. Thank you for visiting, have a great day.

Read more

Boat Plans Aluminium | International Cape Cutter Week 2015

Boat Plans Aluminium

The Cape Cutter 19 is a popular little gaff cutter that I designed for Nick Voorhoeve of Cape Cutter Yachts. Originally built in Cape Town and exported to UK, production moved to UK when Honnor Marine bought the company. Since then many boats have been built and rumour has it that the factory currently has a waiting list for boats to be built. In addition to more than 100 GRP boats, more than 60 have been or are being built by amateurs, from plywood.

Plywood Cape Cutter 19 "Tiptoe" built by Ian Allen in New Zealand.

This pretty little gaffer sails very well and has earned a very loyal following. Her character and sailing characteristics have resulted in bigger sisters coming off my drawing board as well, the Cape Henry 21 and Cape May 25. The Cape Charles 32 is now part way through the design process.

Earlier this year a group of GRP Cape Cutter 19s met in Cornwall to sail together in the first International Cape Cutter Week. After a successful event, they have now announced their plans for International Cape Cutter Week 2015, from 23-31 May 2015. The sailing area will be on the rivers and waters surrounding Suffolk Yacht Harbour on the River Orwell. For this event they hope to also have entries from Europe.


International Cape Cutter Week 2014 from Charles Erb on Vimeo.

If you have a Cape Cutter 19 or are building one and you are in UK or Western Europe, this is an event that you might consider as a holiday destination for next year. You will meet others with their boats, cruise in company, learn from each other and no doubt have a great time. I have been invited and hope to be able to be there. Time will tell whether or not that works out.

The 2014 event was enjoyed by all participants. The 2015 event is getting off to a great start, with three confirmed entries already.

To see more of this design and others from our office, please visit http://dixdesign.com/.

Do you find information about Boat Plans Aluminium are you looking for? If not, below may help you find more information about the Boat Plans Aluminium. Thank you for visiting, have a great day.

Read more

Boat Plans Uk | Great Chesapeake Bay Schooner Race 2014

Boat Plans Uk

The Great Chesapeake Bay Schooner Race is held annually, with schooners of all types and sizes racing each other from the Bay Bridge North of Annapolis to the southern end of Chesapeake Bay. Starting at 13h30 on Thursday 16th October, this is the 25th running of the annual race, which was started by the late Capt. Laine Briggs.This is really two parties, one in Baltimore, Maryland, the other in Portsmouth, Virginia, linked by a yacht race.

I have sailed in this race twice before, on steel boats that I had designed. In 2004 it was on the 60ft gaff schooner "Ancilla II", then owned by Renny Barnes. About 5 or 6 years later I did it on the  Hout Bay 40 "Adventure" that was owned by Charley Holmes.

This year I will sail with Dan Hall on his GRP staysail schooner-rigged Shearwater 45 "Apella". She was built in Cape Town by Patrick Fraser. Patrick commissioned the Shearwater 45 design and built two of them, one for himself and the other for his colleague Denis Colclough. The one that we will sail was the boat owned by Denis and was originally named "Wave Maiden".

"Apella", snapped by solo-circumnavigator Ant Steward at a recent
chance meeting when leaving Newport RI.

The Shearwater 45 has a modern underbody below her classic good looks. It allows these boats to show surprising speed under most wind conditions.

The two schooners were both fitted out with very distinctive colours and detailing, styled after the very luxurious private Pullman carriages that were used by wealthy families to travel on the railroads of North America.

Sistership "Moonbeam" out of the water, showing underbody.

Gorgeous interior of "Apella", looking aft

Looking forward.

The cutter-rigged version of this design won two boat of the year awards at the 2000 Annapolis Sailboat Show. Read more about the Shearwater 45 in an earlier blog post.

Visit our website at http://dixdesign.com/.

Do you find information about Boat Plans Uk are you looking for? If not, below may help you find more information about the Boat Plans Uk. Thank you for visiting, have a great day.

Read more

Boat Plans Catamaran | Sneak Peak at Cape Charles 32

Boat Plans Catamaran

I started to design the Cape Charles 32 a few years ago, commissioned by a client in Maryland. He passed away without having built the boat and it slid to the back shelf, with other designs having higher priority. There it stayed, waiting for a new client to take it on.

Word did get out about this incomplete design and I occasionally received enquiries about when it would be complete or when they could start building. Somehow there was always too much pressure from other designs on my board. Earlier this year the Cape Charles 32 found a spot on my board and is moving forward again and two will start construction when I have the necessary drawings ready.

In the process it has gone through a metamorphosis, prompted by the change of primary client who helps to steer the direction of the design. Eventually the concept of the original client, of a gaff rigged coastal cruiser with simple traditional layout, will be available alongside the version on which I am now working, as shown here.

Preliminary Marconi rig for Cape Charles 32

The square-top mainsail has been described as the modern equivalent of a gaff rig. It behaves differently from a gaff rig but has some of the same advantages and it is prettier than a leg o mutton mainsail. I think that it will work well on this cruiser. As seen here it is preliminary and it may change in some way before completion.

The new client for the Cape Charles 32 likes the interior layout of the Didi 950 and asked if something similar will work for the CC32. When I looked at this possibility I realised that the two boats are almost identical in overall dimensions. The concepts and hull shapes are very different, of course, but in some ways the Cape Charles 32 is the Didi 950 taken back a few steps in time.

Cape Charles 32 Accommodation

The layout will be very comfortable and offers good privacy for two couples or a small family. Full standing headroom extends over all standing areas of this boat because of the horizontal cabin crown. The U-shape galley is very secure at sea, with enough counter area for entertaining in harbour.

Profile and Underbody of the Cape Charles 32

Hull shape and construction is very much as for the smaller sisters in this design range. They are the Cape Cutter 19, the Cape Henry 21 and the Cape May 25. The family is growing.

With a draft of 1.2m (3 11"), the Cape Charles 32 will be a good boat for thin water cruising. If you do run her aground, you can hop over the side to push her off again. That will get you into private anchorages that are out of bounds to deep keel cruisers.

To see our full range of designs, please visit http://dixdesign.com/.

Do you find information about Boat Plans Catamaran are you looking for? If not, below may help you find more information about the Boat Plans Catamaran. Thank you for visiting, have a great day.

Read more

Boat Plans For A Chesapeake Deadrise | Didi 950 Construction Starts

Boat Plans For A Chesapeake Deadrise

Michael Vermeersch has started building his Didi 950 prototype in Ravenna, Ohio. This is the prototype of a very new design. Micheal is building from a pre-cut kit that we supplied and reports that the quality and fit have been excellent thus far.

Didi 950 Kit, ready for unpacking

 Yesterday Michael and a friend set up the bulkheads on the building stocks and he is now preparing to fit the backbone components to tie the bulkheads together.

Didi 950 Bulkheads set up and waiting for backbone.

This design has been drawn to comply with the Class 950 Class Rules. Watch this space for progress reports on this boat and the other Didi 950s being built in Australia, Latvia and Greece.

Please note that precut kits for our plywood designs supplied in USA must be ordered from Dudley Dix Yacht Design and not from the company that cuts them, Chesapeake Light Craft. For more info and pricing go to our plywood kits page.

To see our full range of designs please visit http://dixdesign.com/ .

Do you find information about Boat Plans For A Chesapeake Deadrise are you looking for? If not, below may help you find more information about the Boat Plans For A Chesapeake Deadrise. Thank you for visiting, have a great day.

Read more

Plywood Boat Plans Australia | Get your Orders to us Early

Plywood Boat Plans Australia

The end of 2013 is coming fast. We normally have a rush of orders around year-end but this year it is going to be different. Remember, I will be sailing in the Cape to Rio Race and that is going to create considerable disruption in delivery of orders. I will fly out on December 14th, via Istanbul in Turkey to Cape Town, South Africa. After sailing across the South Atlantic, I will return home from Rio de Janeiro, Brazil, about the first week of February 2014.

Dehlia is the person who glues this operation together. She is my wife and she receives the orders, processes the payments, prints the drawings and magically sends them all over the world, allowing me to spend my time drawing pretty pictures of boats and backing up you, our builders. Normally Dehlia would continue unflustered while I am away playing boats. This time it will be different, Dehlia is also going to Cape Town, to wave goodbye tearfully from the dock. She will leave our home and office before I do, on 3rd December. She will not be back to resume business until 14th January 2014. For a month there will be nobody here to print drawings.

Please dont leave your order until the last minute, we may not be able to supply. This is even more important if you intend to order a plywood kit to build one of our boats. It takes more time to set up a kit order than only to supply plans.

We hope to set up systems to take orders while away, for items that can be supplied by email. That will be for our 3:1 dinghies, study packs and eBook "Shaped by Wind & Wave". Paper orders will have to wait until after Dehlia returns 14th January.

Please send your orders by 29th November. After Dehlia leaves I will be able to process and supply only limited orders.

Thank you for your support both past and future. I apologise for any convenience that this disruption may cause you, we will be back as soon as possible.

Go to http://dixdesign.com/ to see our full range of designs.

Do you find information about Plywood Boat Plans Australia are you looking for? If not, below may help you find more information about the Plywood Boat Plans Australia. Thank you for visiting, have a great day.

Read more

Boden Boat Plans Australia | The Crew of Black Cat for Cape to Rio

Boden Boat Plans Australia

 Our crew for the 2014 Cape to Rio Race is mostly the same as we had for the 1996 running of this race. Here are bios for two of the crew.

Gavin Muller

Gavin Muller was 21 years old on the 1996 Race. He was the baby of the crew by a long way and received the brunt of the good-natured insults and joking on the voyage from the rest of us. He took it all in very good spirits, was a great crewman to have with us and proved to be very capable in all aspects of sailing our boat at high speed across the Atlantic.

Now, 18 years later, Gavin is a much more respectable age. At least he is now more than half my own age. Gavin cant have had any permanent damage from all of our ribbing on that race because it was he that put the thought in front of me to get the 1996 crew together again for the 2014 race. Wonderful idea, Gavin.

He obviously has a good sense of the ridiculous. The bio that he sent me begins with "I started sailing quite late in life at the age of 14". Heck, most sailors wish that they could have started sailing at that age instead of 30, 40 or even 60 years old. When you are 21 then 14 must be relatively late in life. After his late start in sailing, Gavin hasnt wasted his time and has accomplished much. His achievements include:-

Sank an Optimist on the start line of his first Interschools Regatta.
Rose to captain of his Bishops High School Sailing Club
Was part of the youngest crew to sail the Cape to Rio Race, in 1993
Crewed on "Black Cat" in Cape to Rio Race 1996
Member of line-honours crew in St Helena Race 1996 and sailed return to Cape Town.
Achieved Yachtmaster Offshore in 1997, with better grades than he managed in school.
Sailed his 2nd St Helena Race in 1998 and return voyage to Cape Town.
Moved to England Feb 1999, where he still lives.
Sailed 4 Fastnet Races and all qualifying races.
Sailed 7 Cowes Week Regattas.
Sailed 8 Round the Island Races (Isle of Wight).

Gavin is married to Nicole and they have two young children, Alice and George. He is Head of Operations at one of the most prestigious catering companies in London, so I guess that qualifies him to serve us some imaginative high-class meals in the middle of the South Atlantic.

Gavin with wife Nicole and children, Alice and George.

Gavin in Solent sailing garb.

Sean Collins

In my 60 years of sailing, Sean is the one who has sailed more miles with me than anyone else. We always clicked together on boats and have confidence in each other doing the right thing when needed, including to extricate us from some silly situation into which I have put us.

Sean first sailed at about 7 years old, with an uncle who owned an Enterprise dinghy. The bug bit and he broadened his sailing experiences with the Sea Scouts. Seans first offshore experience came in 1976 with his uncle, sailing from Durban to Cape Town on a newly-launched 45ft ferro-cement cruiser. Continuing further on the long-term cruise was thwarted by the need to finish schooling.

Sean is a surfer and spent a few years sailing Hobie cats before buying his own first offshore boat. This was a 28ft plywood double-ended ketch named "Elise". After breaking the mizzen mast she had lee-helm problems and that was what brought Sean and me together for our long association. He commissioned me to redesign the rig as a cutter. He sold "Elise" after he started crewing for me on my CW975 "Concept Won" sometime later.

Sean estimates that he has sailed roughly 10,000 sea miles with me on "Concept Won" and "Black Cat". He was my chosen partner whenever available for the double-handed races and regattas at Royal Cape Yacht Club and Hout Bay Yacht Club. He sailed with me on numerous Double Cape Races, Telkom Regattas, Old Brown Table Bay Regattas, Hout Bay Admirals Regattas, Hout Bay Double Regattas and the weekend and Wednesday night racing at RCYC, as well as the 1996 Cape to Rio Race.

Sean was in the crew of "Black Cat" right from the start, long before she even hit the water. He spent many weekends helping with building her, much of it doing a sterling and nasty job of epoxy coating and fibreglassing the joints of the drinking water tanks, to ensure that they would not fail us in mid-ocean.

Sean moved to England in 1998, with wife Lanesse (now ex-wife) and three daughters. There they spent time sailing the estuaries of the Thames and acquiring the new skills of safely navigating large tides and strong currents. Eventually they bought "Vortex", a Nicholson 35, which Sean refurbished for family cruising. In 2004 they headed South to find sunshine and spent 16 months cruising to the Canaries via France, Spain and Portugal. From there they all flew back to settle back in Cape Town. A year later Sean and his nephew double-handed "Vortex" to Cape Town via Cape Verde, Brazil and Tristan da Cunha.

Bad economic times in RSA resulted in Sean working for a few years in Bahrain, where he joined the Bahrain Yacht Club to keep in sailing. Back in RSA again, work commitments keep him away from home but he gets back to Cape Town regularly. Most of his sailing is currently  on inland waters, where he is an instructor with the youth sail training programme at Mountain Yacht Club on Ebenezer Dam.

Sean with Lanesse and daughters Abbey, Kelsey & Megan

Sean on "Vortex" at Hout Bay Yacht Club.

Gavin and Sean, I look forward to sailing with both of you again.



  








Do you find information about Boden Boat Plans Australia are you looking for? If not, below may help you find more information about the Boden Boat Plans Australia. Thank you for visiting, have a great day.

Read more

Canoe Boat Plans | Great Chesapeake Bay Schooner Race 2015

Canoe Boat Plans

I will be away from my desk from Wednesday morning early, through to the weekend. I wont have my laptop with me, so you wont get me by email for a few days. The reason for this gap in my connectivity is that I will be preparing for and sailing in the Great Chesapeake Bay Schooner Race.

"Apella" approaching the start line for the 2014 race.

The race connects the two port cities of Baltimore at the northern end of the Bay and Portsmouth at the southern end, both of which throw excellent parties for the crews. The course is actually a bit shorter, starting  just south of the Bay Bridge that spans Chesapeake Bay north of Annapolis and finishing at Thimble Shoals off Hampton Roads. That is for the bigger boats but the smaller and slower boats get to finish at Windmill Point about 50 miles further up the Bay, then choose to either sail or motor the rest of the way to Portsmouth in time for the festivities.

I will be sailing on the schooner-rigged Shearwater 45 "Apella", the same boat on which we won Class B last year. She is owned by Dan Hall, who lives aboard and keeps moving up and down the coast wherever schooner events and whim may take him.

Some of the "Apella" crew showing off the silverware in 2014.

It was as we crossed the start line last year that, sitting astride the cockpit coaming and grinding the Genoa winch, I dislocated my left knee. Ill have to be careful about my body placement when grinding this year.

I was wrapped up because it was chilly last year, after a stormy party night.

Great news is that twin sister to "Apella", "Moonbeam", has been bought by a friend of Dan Hall and she is being brought north from Florida for a refit, after which I anticipate that the two boats will get together often. I look forward to match racing these boats down the Bay in future years.

To view our range of designs of all types, please visit http://dixdesign.com/ or http://dixdesign.com/mobile.

Do you find information about Canoe Boat Plans are you looking for? If not, below may help you find more information about the Canoe Boat Plans. Thank you for visiting, have a great day.

Read more

Plywood Boat Plans | Cape to Rio Race 2014

Plywood Boat Plans

I have done it 3 times before and I am soon going to do it again. Sail in the Cape to Rio Race, that is. I have crossed the South Atlantic 4 times, so this will be my 5th crossing.

In 1993 I raced on the Shearwater 39 "Ukelele Lady" (yes, I know that ukulele is spelt incorrectly but the guy who carved the name board was a bad speller) as sailing master and navigator. The boat was owned by my friend Nick Taylor, entertainer and TV personality.

In 1996 I sailed on the Didi 38 "Black Cat", as skipper and co-owner. Between the 1993 and 1996 races I had designed and built the new boat for the race. After Rio, we cruised her to the beautiful Bay of Islands SW of Rio before I raced her back to Cape Town, double-handed with Jay Barnes, in the South Atlantic Challenge.

Built in my garden in Hout Bay, here we are turning the hull.

 In 2000 I sailed on "Black Cat" again, as skipper. By then my co-owner, Adrian Pearson, had bought my share and was sole owner. Clive Dick and Adrian sailed her back to Cape Town.

Now "Black Cat" is 18 years old and has many thousands of ocean and coastal miles under her keel. We are about to head out onto the South Atlantic Ocean again, in the 2014 Cape to Rio Race. We have assembled the same crew as in 1996 with the exception of the navigator. My good friend Brian Cole was navigator in 1996 but is now getting on in years, so we have a younger man in his place.

Launch day in 1995.

  I am skipper and you all know me. No more info needed.

Adrian Pearson is owner and has sailed about as many miles  on "Black Cat" as I have. He does not skipper, preferring to be one of the crew.

Sean Collins sailed many miles with me on my CW975 "Concept Won", racing in Cape of Good Hope waters. He was with me for many double-handed events as well.

Gavin Muller was the "baby" of our 1996 crew, having graduated from high school the month before the start of the race. Now, 18 years later, his age has doubled but he will still be the youngest on the 2014 crew.

Dave Immelman is the new member, sailing as navigator. Dave has done extensive international offshore and ocean racing and is in charge of the major refit of "Black Cat", which is currently in progress.

Flying out of Table Bay after the start of the 1996 race.

 "Black Cat" has gone through big changes since I last saw her. She has been prettied up on the inside with hardwood trims and teak/holly cabin soles. Some comfort items added, like hot and cold pressure water system, separate fridge and freezer and inside shower. She also has a lot more in electronics, like radar, chart plotter and sailing computer, with instrument repeaters and dual compasses in the cockpit. Rig and deck hardware are also seeing upgrades to carry the increased shock loadings of a new suit of tougher hi-tech sails. I am looking forward to sailing on her with all the new toys and go-fast goodies.

She will go back into the water when this work has been completed, then Dave Immelman will do extensive sea trials to test her thoroughly before I arrive in December to give her my own check-over.

Relaxing in the Bay of Islands, Brazil.

For anyone interested, you will be able to track our progress on the Cape to Rio Race website and we will have a blog for "Black Cat" to pass on stories from onboard.

And, if anyone has an interest in sponsoring "Black Cat" in this event, please contact me to discuss what we can do for each other.

To view my boat designs, please go to http://dixdesign.com



Do you find information about Plywood Boat Plans are you looking for? If not, below may help you find more information about the Plywood Boat Plans. Thank you for visiting, have a great day.

Read more

Boat Plans Skiff | Cape May 25 Trailable Gaff Cutter

Boat Plans Skiff

Thirteen years ago Nick and Lindsay Voorhoeve commissioned the Cape Cutter 19 design, which they built in GRP in South Africa. They marketed it very successfully in UK for a few years before selling the company to Honnor Marine, who moved production to UK. It continues to be sold by them through Cape Yachts. We also sell plans for amateurs to build this design in plywood and it continues to be one of our popular small cruiser designs.

"Tiptoe", Cape Cutter 19 built by Ian Allen in New Zealand

Time showed that there was considerable demand for a slightly larger version of the same concept. That resulted in  a client in Australia commissioning the Cape Henry 21. To date we have sold plans for 130 plywood boats between the two designs, with a slight leaning toward the bigger boat.

Cumhur Regay built his Cape Henry 21 in Turkey

More recently I have been commissioned to design two more bigger sisters to the Cape Cutter 19 . The Cape Charles 32 has been waiting in the wings for a long time and will remain there awhile longer. The design is about half-finished and there are a few people waiting for it but there are other things getting in the way (life, sailing, surfing etc). The other one, the Cape May 25, is now complete and plans are ready for anyone who wants to build her.

The Cape May 25 is 253" long on deck and 240" on waterline, with beam of 98". Draft is 2ft with the centreplate up and 54" with the plate down. Lightship displacement is 4500lb. Her weight and beam mean that she is not really a trailer-sailer but is trailable with a large vehicle and will require special permits to be towed on public roads. Her forte will be the ability to sail into shallow areas that are inaccessible to most other sailboats of her size and to be taken home for the winter to save storage costs. Another strong point that she shares with her sisters is excellent speed, resulting from the long waterline, fine bow and generous sail area.

Cape May 25 Sail Plan

My client for this design is a tall person and needs extra long berths and ample sitting headroom, so the forward berths are 2.2m long. The cockpit is also long enough for him to sleep there on balmy nights.

Unlike the smaller sisters, the  Cape May 25 has guardrails. It also has wide cockpit coamings that are comfortable for sitting out, leaning against the guardrails.

Construction is lapstrake plywood, over stringers and permanent bulkheads. This is more challenging than basic stitch & glue construction but it does result in a gorgeous boat that really shows off the builders achievement. The smaller sisters have shown that these boats can be successfully built by amateurs with reasonable but not expert woodworking skills.

To see our full range of designs, go to http://dixdesign.com/priceabr.htm.

To see our range of plywood designs, go to http://dixdesign.com/priceply.htm.

Do you find information about Boat Plans Skiff are you looking for? If not, below may help you find more information about the Boat Plans Skiff. Thank you for visiting, have a great day.

Read more