Boat Plans Aluminium | Today is the good ole days

Boat Plans Aluminium

Ive  had a good life. My mom and dad brought me up in a camping , hiking, pack mule traveling and eventually sailing cruising lifestyle. I was brought up with the adittude of if you wanted something you could not afford than build it yourself. Want to travel long distances on a Bycycle with an open time frame ..then do it on your own and not wait for a group to hang out with. This simple mind thought has  enabled me to just get things done and keep moving ahead. 

Looking back in time its nice to have all these memories of places seen, things done and felt. Like the time when bycyling through the Grand Tetons in Wyoming at the age of 19 .I awoke in the fall morning haveing just slept in my down sleeping bag on top of a picnick table that night. The morning air was so crisp when poking my head out of this cacoon. My sleeping bag was completely frozen solid from my perspiration during the night. I was a popsicle outside with a warm inside.

I have been lucky many times in my adventures, from close calls from vehicles during my bycycle touring days, my hitchhiking adventures, hiking and backpacking trips to my singlehanded ,and offshore sailing trips. Ive cheated death a couple times or as I like to put it I was not ready to die. So I never gave up and Iam still out here looking around the next bend to see whats there.

 

Today finds me in the Leeward island of Dutch St. Martin waiting for Rachel and our dog to fly in. This is a hectic place for a guy like me, but its very dog fly in friendly so here I wait doing boat chores, some design commissions and ponder the present , the past and what the future holds in my sailing lifestyle.

The past is fun to think back on but it can never be recaptured. I still look back and forth to the present. We first sailed to St. Martin on the Hogfish 24 years ago with rachel and our young daughter Kalessin who was not yet one year old. We spent Christmas in Phillipsburg bay at anchor eating a can of smoked oysters and an avocado . We had sailed here to buy a duty free am radio. Life was so simple then. No email, Internet, GPS , engine, and not very many boats. We had just sailed from St. Barts where we had splurged on a French pizza for $23.00 ! Yes its always been very expensive there. A lot of miles have passed under our keels since then. lots of hard work getting ahead and staying ahead. This we have done as a simple couple not wanting more than we could afford making our kids a part of our rolling stone- vagabond life style. We just have kept on going with the many different opportunities that have come up and have delt with our daughters along the way finding entertainment when young and shore side schooling when older to get them involved in the locals lifes. Both girls have excelled in  schooling both having won collage scholarships based on merit and grades. Growing up with a boat bum like me has not held them back. That was the good ole days.

Christmas Day 24 years go in St. Martin. Looking at a second main Id made from Jim Melchors old Alerts mainsail.

The present brings me to having moved out of the Simpson Bay Lagoon to re anchor off the beach in cleaner water and not so much harbor traffic. I had anchored in a small shallow part of the lagoon to get away from all the mega yachts, and just yachts in general as I keep thinking what would happen if the Hogfish Maximus where to get loose and drift down on a half a billion in yachts. In the Bahamas and other farther flung anchorages Iam used to putting out 2-3 anchors with lots of scope. I call my big fishermans my breaks. Then I feel good about going out on adventures in the skiff. Here there are so many yachts , sailboats ,wrecks and just stuff about there is simply not enough room today.

Right now Iam anchored off the beach in what looks to be shallow water but is about 8 which is shallow for most boats here. Its very rolly and bumpy but I can see the bottom kinda and I could get underway under sail if need be so I feel better here. 

Since arriving here Ive met up with some old sailing mates of ours . Some have gone around the world 

 for the third time since last talking. Our talk now is mostly about whats up with finding work, local crime, the rising costs of clearing in and out of ports and how many f#%king boats are anchored through out the worlds anchorages today. Work is still easy to find if you have skills and work ethic . Local crime is always there , just lock stuff up. The costs of clearing in seems to be a racket now as all these islands are within sight of each other with the locals running their boats back and forth with no hassles but for us and all the day tourists what a racket. 

I realize Iam an old fart cruiser because the growing number of fiberglass huge 55-70 sailboats being run by retired couples that have had no previous sailing experience is overwhelming . These boats are new and are worth from $ 350,000.00  to  a million upwards . By my count I have seen since sailing in here the past two weeks at least 500 + and counting and trying to avoid. Thats just sailboats not power boats .What amazes me , boats dont appreciate like land can so where did all this wealth come from? Wow. 

Now I realize Iam an old fart under achiever. Ha Ill stay simple and keep my freedom.

The wind here is ever present with rain squalls lasting only a minute or two. The locals are still nice and fun to talk to. Eating a huge meal where the locals eat costs  $5.00 with a beer. At the water front bars the food goes up but alchole is still the cheapest thing around. I like to go in the evenings to the St. Martin yacht club bar and watch the yachts go through the bridge at 5:30 opening.

From my observations in life I have noticed that if you really want to show the world how much money you have to spend then you buy a MEGA yacht. A trophy wife are a dime a dozen, a huge house nobody ever sees, the jet you flew in on is parked with the 60 other look alikes at the airport.

 BUT in  a big ole mega yacht every one can see and when it squeezes through the Simpson bay bridge your captain will sweat but you can look down on all the minions waving up at you.

Thats why I like taking my yacht through the bridge .

Milling about waiting for the bridge opening. How would you like to drag down on that yacht ? Ah... Sir I can fix that.

If I anchor 100 away in the same anchoage as these yachts and eat at the same places, er maybe and see the same sights and breath the same air.. Should I consider myself a one percenter?

My skiff is the third one ... No its the white one... No ... What was its name again?

Theyre everywhere! 

Cueing up to get through, I went last... Safer

Going through. I have a friends condom boat on deck. They will be here soon to get it.

Now thats my kind of yacht ! Life is good , three big box wines, grocerys, and the whole crew in a 6 rubber condom boat.

 

Its a bit more hectic here now  but I have some change in my pocket and time to explore the new realitys of the present. 

I do have to confess, I have a trophy wife , and very nice house, a yacht and I do get high once in awhile so no jet ,who cares,

TODAY IS THE GOOD OLE DAYS !

Do you find information about Boat Plans Aluminium are you looking for? If not, below may help you find more information about the Boat Plans Aluminium. Thank you for visiting, have a great day.

Read more

Boat Plans Nz | Cape to Rio Race Starts Tomorrow

Boat Plans Nz

It has been a long slog to get here and, strange as it may seem, even now I am not sure where "here" is. We need to be on the start line in Table Bay at 14h00 South African Time (UTC+2) and have been working toward that goal for a year. Now that we are almost there time-wise, we have had all sorts of issues popping up to try to trip us and prevent our participation. Each time that we side-step an issue, another appears in its place.

These are not problems that are directly related to the boat, neither are they related to most of the crew. I cant say what they are but they have been a major distraction in our preparations, detouring our efforts and moving our focus from much needed work into stuff that really should not be on our minds at this stage of preparations. These issues sap energy and drain enthusiasm. It takes effort to maintain optimism, which is normally self-fortifying.

We expect to be on the start line tomorrow and will be deeply disappointed if we should be prevented from going. Only time will tell whether or not we will be there. Watch for the yellow boat if you are able to watch it live, or maybe recorded live (whatever that means).

From here on I will not be posting on this blog live until after the race is over and I return to USA. I will be sending email updates to my wife, Dehlia. She will be posting on the blog but it will probably be without photos. Our Internet connections via satellite phone will be too slow to transfer photo files. If we have something really special to show then we may make an exception.

So please follow us via the tracking link on the race website at http://cape2rio2014.com. This is not a clickable link, so please copy and paste into your browsers address window.

Do you find information about Boat Plans Nz are you looking for? If not, below may help you find more information about the Boat Plans Nz. Thank you for visiting, have a great day.

Read more

Boat Plans Aluminium Australia | Back to work on the boat

Boat Plans Aluminium Australia

Its been a while since Ive made a post but Im happy to say that Im back to working on the boat. Life seems to get in the way of things we want to do, and Ive recently had a run in with just such an episode. Getting the house ready for winter, a short lived uptick in my business ( business is still way down and dropping), pulling the Caver boat out of the water and winterizing, cutting firewood for the shop and house, blah, blah, blah. I"ll quit bitching now, but Im sure all who might read this will be able to relate.

The next job at hand on Conalls big boat build is to finish getting ready for the insulator to do his thing. I need to finish painting the engine room witch is turning into quite a bit of unfinished business. My list of what needs to be done in the engine room is as follows:

- Install the generator and weld in all the fittings for the water lift exhaust system.
- Weld close the generator access hole.
- Install ac and dc electric conduits and various junction boxes and fixture boxes.
- Install the center baffle on the exhaust/intake trunk
- Re-prime the engine room with etching primer, then top coat with Alkyd Enamel
- Install all the wood firing.

This is the abbreviated version of my list as I still have ac and dc conduit work to do in the master stateroom, forward cabin, and head. All in all I would have to guess that Ill have a solid month worth of work to get her to the point of being ready to insulate.

I"ll start to post some pictures as I move forward. Ive found that this boat building thing seems to go a little easier if I break the "big boat build" down into about 80,000 smaller jobs that make up the "big boat build". I might continue this post and add to it as I mover forward, or Ill post a separate entry for each of the micro jobs I get finished.

Conall

Do you find information about Boat Plans Aluminium Australia are you looking for? If not, below may help you find more information about the Boat Plans Aluminium Australia. Thank you for visiting, have a great day.

Read more

Boat Plans Bruce Roberts | Americas Cup Value to Sailing

Boat Plans Bruce Roberts

I have recently been quite active on the LinkedIn forums about Americas Cup. It is not in my nature to participate in forums because I have found that it is all too easy to get drawn in and become embroiled, fending off attacks by Internet trolls whose great ambition in life is to be destructive to others. LinkedIn is a more closed community and less apt to show this nastiness and aggression. If I feel strongly enough about an issue then I will have my say and keep up with the rest of the discussion.

Just such a discussion came out of my last blog entry, about Race 13 exceeding the time limit. You can read that entry by scrolling down the page or go to the blog archive on the left of this blog. The response was that races should not have time limits and should just continue until there is a winner. It referenced baseball as a comparison. Discussion then progressed to the format that is being used for this current edition of Americas Cup, AC34. Some of my posts have been well received and it was suggested that one post in particular should be read by a wider audience.

I responded to the following question. I dont want to name the poster, I dont have his permission.

"So I am going to go back to my question on the cup. Forty minutes time limit for an Americas Cup race? I would like to see the last race ground out for say 2 hours of excitement vs. just 40 minutes. Are we an ADHD society that if it goes longer that 40 minutes we loose our audiance (sic). I dont care. Its the Americas Cup. It should be raced with sweat and tears to the end. It should go as long as a football game or basketball game(including time outs and media breaks). Shouldnt it?"

Here is my response.

"We all have our own ideas on what should be and what shouldnt be. Whos to say which is right? I agree that 40 minutes does seem too short a time limit but I understand the aim of the organisers to popularise sailing competition with the non-sailors and the parameters within which they were working.

Sailing is its own sport and it is evolving rapidly with technology. Do you really want to watch these two boats sailing back and forth upwind and downwind for 3 hours or more each race and potentially for 17 days (19 days including the 2-race penalty) in a row? That will drive the TV viewers back to whatever they were watching before AC34 came along.

I grow thoroughly bored watching football and baseball. They are stop-start games and they hold the attention of the audience for very short periods of action. The players get to rest for much of the duration and only work in short bursts. They can go on all night if needed, without burning themselves out. The crews on these boats are working hard the whole time, every race.

I think that it will work to compare AC racing with cricket. Test cricket takes 5 days of play, broken into 4 sessions each day. With no limits aside from the 5-day time limit, it often ends with no winner. It bores most people to tears. Then one-day international cricket was introduced, featuring 50 overs (300 balls) bowled by each team against the other batsmen. Suddenly cricket became interesting to a much wider audience. Now they play international 20-over games and the games are very exciting to watch, with massive viewership.

Rugby was always an exciting running game but it has also gone the same route of short, very fast and exciting games with the Rugby Sevens. This is what is needed to hold the attention of the modern world, where there is always something else trying to grab attention. Why should sailing not be right there in the fray also grabbing attention with short, fast and very exciting races.

Sailing is a sport of ageing players and needs new and young blood to survive. This event is likely to attract new people to sailing in one form or another. We can watch yacht racing as we knew it 20 years ago until it goes the way of the dinosaurs or we can embrace the new world and regenerate sailboat racing as a viable sport.

There is still a place for 5-day test cricket, for a much smaller audience than the other forms. Likewise, there is also still a place for the longer duration sailing races. I will be skippering a 38ft sailboat across the South Atlantic in January. We will be racing flat-out for 3 weeks from Africa to South America. There will be exciting times for me and my crew far away from the eyes of any TV audience. I enjoy that racing immensely, as a participant but I dont expect our slow progress across the ocean chart to keep anyone rivetted to the edge of their seat the way that AC34 is doing to us right now.

I think that with AC34 they have hit a winning formula and I am enjoying every short minute of it."

Thank you for taking the time to read my viewpoint. It is often a bit off the beaten track but I think that it is valid.

Do you find information about Boat Plans Bruce Roberts are you looking for? If not, below may help you find more information about the Boat Plans Bruce Roberts. Thank you for visiting, have a great day.

Read more

Boat Plans Butler | Ive started to finish

Boat Plans Butler

The last few weeks have found me rushing around to get the boat weather tight, and starting to organize my thoughts on  how best to manage the build to the finish. Like most things on this project, a lot of work needs to be done in a certain order before progress becomes visible.

With winter sneaking up on us, I had to get the barn put back together. The  mornings are getting colder and with the heavy dew making its way in to the barn, some of my tools are showing signs of rust. It took me a weekend to frame the opening back in, find the correct insulation, and trim the door opening to be ready for the crew who were re installing the door. I have to be able to fabricate much of the wood work for the interior in the barn, so having it weather tight and able to be heated is a big deal to keep the boat build moving. As I write this post, the barn is now back together, and while its still a mess, it sure feels good to have all the space back.

The dry exhaust stack for the engine room is one of those deals that not much else can be started  until this part is finished. Getting this finished turned out to be a bit of a pain as some poor measuring on my part  had me doing a few  things over. I framed access panels  on both the port and starboard side of the stack. The port side panel is larger as to allow me to install the exhaust pipe through the panel. I also had to configure the panel opening to work around the microwave cabinet so I dont have to remove the cabinet to replace the exhaust pipe.

The  exhaust stack was the last big welding job I  have to do inside the boat, and it feels good to be able to take the big generator out of the back of my truck and leave it in the shop.

Now that the foam is all finished, I wanted to get the ceiling in the master cabin, and get that room pretty much wrapped up. The ceiling is 3 1/4" pine bead board painted an off white. To make things easy on myself, I primed and painted one coat of top coat paint on the boards to prevent bare wood from showing once things start moving around. The ceiling  job was pretty straight forward, and the only tricky part was building the removable access panel on either side of the center beam. The access panel is for throttle and engine controls, hydraulic lines for the anchor winch, hydraulic lines for the steering system, and some conduit. The center beam is about 3/8" lower than the ceiling, and instead of wrapping it in bead board, I decided to wrap it in Cherry. I needed a board over 10 long, and instead of joining two together to get the length, I found a long one on the bottom of my now air dried stack of lumber. The longest boards I have also  happen to be the widest boards. As you can see from this picture, this particular board is over 19" wide and dried pretty darn straight. After I finish milling the faux beam, Ill install it in a day or so, and the master cabin will have a finished ceiling in it.After the master cabin ceiling is finished, another day of work should have the guest cabin dressing room ceiling completed which will also mean all the ceilings below will be finished.

Another small detail I needed to get squared away was building a proper set of steps to get in to the boat. Ive been using a ladder, and given the amount of trips and quantity of material I have to get on the boat, the ladder was the old accident waiting to happen. I  also have a lot of people who like to stop by, and any thing I can do to prevent them or me from getting hurt helps everyone in the long run. I also want to do right by the boat yard, and keep my operation in such a way as to minimize any exposure.

The tooling I need to finish the job is also getting to the point where Im comfortable. I wish I would have built all the engine room cabinets before we move her, as it would be nice to be able to start organizing the floating shop. Once in a while I do find myself borrowing a tool off of my truck, but for the most part the boat is now tooled up.

Boat building and schedules dont seem to get along in Conallville, but I"m going to take another stab at it. My plan is to have the bulk of the wood work finished by sometime in January. Once the wood work is finished and coated with urethane, I can focus on getting the needed systems up and running for our May/June launch. Without going into a bunch of detail, the systems Im talking about are AC/DC electric, hydraulic, and engine controls.

Cheers

Do you find information about Boat Plans Butler are you looking for? If not, below may help you find more information about the Boat Plans Butler. Thank you for visiting, have a great day.

Read more

Pontoon Boat Plans | Moved to the boat yard

Pontoon Boat Plans

Having the boat moved to a boat yard firmly places our build in to the next phase, and knowing that all work we do from here on out will be final fit out for our Spring launch has us feeling superb.

Putting the move together represented about six weeks of patiently planning and trying to make all the parts come together. I had decided to have a complete brake job done on the truck, the CAT track loader needed some work, the barn door needed to be modified, permits needed to be procured, signage and safety gear needed to be found, etc... The reason I had to go to all this work vs paying a boat hauler,  is that in our part of the world there are no boat haulers that can move a boat of this size and configuration, and the grade steepness of our driveway scared away the one hauler I talked to.

The boat moving crew was made up of a few close friends: Ollie, Bud, Dennis, Pat the mayor, and Bill. The night before the move, Ollie and I were getting things ready, and as I moved past the hitch bar of the dolly while on the bulldozer, the bulldozer track grabbed the hitch and tore metal giving us a late day welding repair.

The plan to get down the drive way was to  have the boat hooked to the the tow truck, the track loader in front of the truck in case of a catastrophic event, and the 40,000 lbs excavator in the rear holding the load. The biggest problem of moving a hay wagon type dolly down such a steep grade with such a heavy load is that the steering axle is going to want to jackknife. We could not  have done this without having the excavator holding tension on the load to prevent a jackknife. The driveway is gravel, and while we did grading work on it prior to moving the boat, the gravel is like marbles, and the truck could not get traction. To much brake pressure on the truck, caused the rear of the the truck to begin to jackknife and the load began to move dangerously off course. The end all solution was to have the excavator hold every thing while the truck was used for steerage with no braking at all. I was able to control the excavator, but it was tenuous at best as it just at the point of breaking free on the marble like gravel driveway. I had guessed it would take 20 minutes to get down the driveway, and three hours later, we finally made it out to road.

Once out on the road, and having the road blocked, one of my neighbors stopped to see how things were going and to tell us there was a wreck in town with two state troopers working the accident. I had obtained an over height/over width permit, but one of the permit rules was that we hire a state trooper as an escort. Given  the home made dolly, and the basic unsafe look of the dolly, I felt a state trooper escort would not let us leave, so I decided not to contact the troopers for the move. I had a permit in hand, so I could not get fined for not having a permit, and if I did get pulled over, the troopers would have no choice but to let us proceed. I was betting that a trooper pulling us over was not going to want to deal with having the boat by the side of the road for a day or two while another tow vehicle was brought on site. The trip was only Twelve miles port to port.  We were basically asking for forgiveness vs permission with only a reduced fine for not following the exact parameters of the permit if caught. Given that we now knew that troopers stood between us and our only route, we decided to use the time to jack the boat up and re adjust the dolly as it had shifted due to the extreme forces placed upon it as we came down the hill. The "time out", we as we waited on the road gave all some time to calm down and double check what we were doing.  We live in a rural area, and our road is narrow and not heavily traveled. We moved the boat over as far as we could to one side of the road, allowing cars to pass  with one set of wheels in the grass as we worked on the rig. We sent Dennis down to the area where the troopers were to let us know when they left. With us blocking most of the road and working on the rig on a drop dead gorgeous Saturday morning, our work site soon became a social hot spot as neighbors pulled over to see "wass up?".  Two  hours later, the rig was aligned, the troopers were gone, and we were moving towards the boat yard.

The rules of the permit were that we have an escort vehicle in front checking wire height, and an escort vehicle in the rear ( along with a state trooper). The Mayor and Bud were in front dealing with traffic, and pushing up low wires as we wound our way down state route 132 towards the more open state route 52. Because our front tires were so severely over loaded and were afraid of heat building up and blowing the tires, we crept along at 10 - 15 mph. Given that it was a Saturday, and with people out and about, the spectacle of moving such a large boat began to feed back to us. Shannon was riding in the dump truck with me, and she began to start seeing pictures of us showing up on face book. It was kind of funny watching people pulling over and taking pictures of us with their phones. Once out on the open US SR 52, the mental pressure on us subsided, and almost an hour later we pulled in to Washington Marine. Hugs, handshakes and some back slapping were had as we quickly unhooked the boat from the truck for the return trip back to our place to get the wheel house.

The night before, Ollie and I had backed the trailer under the wheel house, so all we had to do was jack it down on to the trailer and bind it down. The wheel house is almost 15 wide, and was a little off center on the trailer, so I had to stay pretty much in the center of the road. The good news is that I was able to get up to speed, so the trip down to the boat yard only took 1/2 of an hour. Once down at the boat yard, we backed the trailer up to hull and unhooked it so we can deal with it on Monday. Job done.

I had touched base with the yard about getting the wheel house craned on to the hull early in the week so Monday morning Ill be confirming our schedule. Hopefully, shell be joined together early in the week, and by this time next week, well have made the transition from a dream in the barn, to a legitimate boat inching closer to launch. Heading back home in the dump truck with the windows down and the river shining as the sun was closing in on the horizon, we noticed all the boats anchored in the river on  this fine Saturday night, and we felt good knowing we would be joining them next Spring.

Cheers

 

Do you find information about Pontoon Boat Plans are you looking for? If not, below may help you find more information about the Pontoon Boat Plans. Thank you for visiting, have a great day.

Read more

Wooden Boat Plans Australia | to drill and tap wood bass wood from RodCarr carrsails com via yahoogroups com

Wooden Boat Plans Australia

Drill a proper sized pilot hole. Load it with thin CA. Tap your thread. 5-40 or larger will work reasonably. Smaller than that, not so much. Rod Carr

Do you find information about Wooden Boat Plans Australia are you looking for? If not, below may help you find more information about the Wooden Boat Plans Australia. Thank you for visiting, have a great day.

Read more

Pontoon Boat Plans Aluminum | Georgetown Wooden Boat Show This Weekend

Pontoon Boat Plans Aluminum

Saturday 19th October is Georgetown Wooden Boat Show, on the waterfront of Georgetown South Carolina. We will have our prototype Paper Jet on display, among the land exhibits on Front Street.

This year we will enjoy the company of two other Paper Jets, local to that area. Bob Turner of Pawleys Island has just completed his boat and Ted Bullock of Barrier Island Boatbuilders in Charleston will exhibit his one, which is nearing completion.

Paper Jet #007. Numbers are now approaching 80 boats.

The Paper Jet is very different in concept from most other boats that will be on display. The very light but robust construction and thoroughly modern image of these boats provides a sharp contrast with the generally classically styled boats, of mostly traditional construction methods, of other exhibits.

If you are within day-trip range of Georgetown, please come by to talk about the Paper Jet and any other of our wide range of designs that might interest you.

The red boat in the photo above is for sale. It was professionally built with nice detailing. If you are all-thumbs when it comes to woodworking then this boat can provide a painless route to getting afloat in a light and fast performance dinghy. It wont be at the show but we will be able to give details and put you in contact with the seller.

To see our full range of designs, please visit http://dixdesign.com/ .

Do you find information about Pontoon Boat Plans Aluminum are you looking for? If not, below may help you find more information about the Pontoon Boat Plans Aluminum. Thank you for visiting, have a great day.

Read more

Canoe Boat Plans | Photos for 2014 Calendar

Canoe Boat Plans

I am starting work on our 2014 calendar and I am still looking for a few more photos to complete the 12 months plus cover that I need. If you have any nice  photos of your boat of our design that you would like to be featured in this edition, please send them to me. The boat doesnt have to be sailing or even in the water yet. If the photo is clear and interesting then we might use it. It also needs to be at least 300dpi resolution, preferably more.

Cover from 2013 Calendar, with Italian Dix 38 "Imagine".

August photo, Challenger 13 in Lithuania.

Boat size is not important, as long as the photo is interesting and high quality. We even have our smallest design, the Dixi Dinghy in the 2013 calendar in a photo that caught my attention.

To see our range of boat designs, please go to http://dixdesign.com/ .

Do you find information about Canoe Boat Plans are you looking for? If not, below may help you find more information about the Canoe Boat Plans. Thank you for visiting, have a great day.

Read more

Boat Trailer Plans Australia | Our Boat for Cape to Rio 2014

Boat Trailer Plans Australia

A few weeks ago I announced that we will sail in the Cape to Rio Race in January. If you missed it, you can read it here. Now I would like to tell a bit more about the boat.

Her name is "Black Cat" and she is very special in my life. I designed her, I built her in my garden and I have sailed her across the South Atlantic three times. I have also raced and cruised her for many, many miles on the notorious Cape of Good Hope waters and she formed the foundation of my best selling range of boat designs. She is the prototype of the Didi 38 design and older sister to designs from the DS15 (Didi Sport 15) through to the DH550 .

"Black Cat" with her crew on launch day.

 I started concept sketches during the 1993 Cape to Rio Race on the Shearwater 39 "Ukelele Lady". "Ukelele" is very comfortable and carried us across the Atlantic in 29 days, excellent for a cruiser.  Still, I resolved part-way across  to do the next race on a boat of my own, which would be better able to take advantage of the downwind surfing conditions found on this race.

The new boat was to be cold-moulded wood. It was to be very light, with a big rig and deep bulb keel for high performance. Light and beamy boats are uncomfortable at sea and I sometimes get seasick, so I designed her relatively narrow for comfort. Narrow beam would also make her even faster.

I had nearly 3 years to build but I had a very big problem, I had no money to start. It was nearly a year before I had money to start building. Now the problem became a lack of time to build the cold-moulded boat, so I had to find an alternative solution that would be quicker to build.

My solution was to develop a method for building a rounded hull shape from plywood, using a radius chine form developed from my metal designs. I needed it to be mostly sheet plywood for fast construction but a rounded shape for performance, aesthetic and resale value reasons.

The resulting boat was 4 tons displacement in measurement trim and with 50% ballast ratio. She turned out to be clean, simple, pretty and a delight to sail. In two Cape to Rio Races she carried us across the Atlantic in 21 days in vastly different conditions. In one race she topped out as 18 knots and covered 250 miles in 24 hours. On the other her top speed was 22 knots but her 250 mile record went unbroken.

Where did her name come from? She is, after all, a yellow monohull and not a black catamaran. Black Cat is the top-selling peanut butter brand in South Africa and they sponsored her in the 1996 race. The kids knew her as the "Peanut Butter Boat" and her big  Black Cat spinnakers attracted a lot of attention.

Moving well in very light breeze.

She is quick on all headings in light breezes. The above photo was taken while racing on St Helena Bay in only 3-4 knots of breeze, a race in which she took line honours with a very comfortable lead over the 2nd placed boat, also a 38ft cruiser/racer.

She also loves to run free in a strong breeze. From cracked off on a fetch through to a run, she flies in strong conditions. Like me, she loves to surf. I surfed her at 22 knots down a very big wave mid-Atlantic after a storm.

Yet, she remains a home-built plywood boat and I look forward to spending 3 weeks with her and her crew as we cross the ocean once again. In the next few weeks I will write about the crew who will keep me and "Black Cat" company on this voyage.

To see our full range of designs, please visit http://dixdesign.com/ .

PS. Entries for the race currently stand at 26 boats, with another 19 pending. The race website is at http://www.cape2rio2014.com/ .


Do you find information about Boat Trailer Plans Australia are you looking for? If not, below may help you find more information about the Boat Trailer Plans Australia. Thank you for visiting, have a great day.

Read more

Boat Plans Wooden | Builders to do list

Boat Plans Wooden

Order Star 45 construction drawing from AMYA store

Buy or borrow books on boat building. Join the Star45 discussion forum.

Decide on type of planking and wood to be used to build the model.

Set aside a work space for building.

Review the bill of materials need to build the model and buy the materials.

Order deck and mast fittings.

Order mast (if you are buying the mast) and order sails (or sail material).

Choose the radio system, buy a sail control unit, Order keel bulb.

While the hull is under construction build:

Keel fin and ballast bulb

Rudder assembly

Make or assemble spars ( mast and booms)

Build cradel to hold boat under construction and when finished.

Test Radio System and sail control unit

After hull is planked:

Install keel trunk or provisions for mounting keel.

Install radio and sail control unit, Then remove while construction continues.

Contstruct deck and hatches

Install/mount deck fittings

Test access to radio and sail control inside the hull.

Provide a exit guide for radio antenna so it can be attached to mast or stays.

Install power switch for turning off batteries

Test mount keel

Paint hull, rudder and keel

Assemble hull, rudder and keel

Set up mast and boom.

Install radio controls.

Check running rigging.

Attach Sails

dry sail model

--

Sail
Display
Storage

Do you find information about Boat Plans Wooden are you looking for? If not, below may help you find more information about the Boat Plans Wooden. Thank you for visiting, have a great day.

Read more

Boat Plans And Patterns | Star 45 Setting Sail on line How To Sail resources

Boat Plans And Patterns

From: "Don Keeney" <1keyknee@281.com>
Date: Sun, 19 Nov 2006 15:39:26 -0600
Subject: [Star45] Sail Trim

A great place to learn about sail trim and sailing in general.
http://www.sailingusa.info/sail_trim.htm

Don Keeney
Star 45 Class Secretary
--
Outstanding recommendation. Wonderful site. full of photographs and all sorts of instructional materials. Pictures of tells and how to read them:)

Another must place to visit (you can try out your sailing skills):
National Geographics Interactive Sailing:

Master rudder and sail to get your boat going as fast as possible no matter what direction youre sailing in-or which way the winds blowing.

Controls available:

Sail Adjuster: Use the left sliding controller to rotate the sail in relation to shifting wind (shown as arrows). When you cross the path of the wind, your sail will swing to the opposite side.

Rudder Adjuster: Using the right sliding controller, steer to port (left) or starboard (right).


Uncle Dave

Do you find information about Boat Plans And Patterns are you looking for? If not, below may help you find more information about the Boat Plans And Patterns. Thank you for visiting, have a great day.

Read more

Boat Plans Arch Davis | Time to Order for Winter Projects

Boat Plans Arch Davis

The weather is getting colder in the north and our minds move to thoughts of staying inside to keep warm. Staving off cabin fever from being trapped inside becomes a problem, particularly if you have children. Keeping them interested and active can become a problem as the cold months go by.

Building a small boat in your workshop or basement can do wonders in this situation,. It draws the young ones away from computer games and cell phones, teaching them new skills that they can use throughout their lives. They will be helping to create something with character, something that would not have existed without their work, which will give them a lot of fun in the warmer months and which they will appreciate more and look after better because they helped to create it with their own hands. We all take more care of things if we had a big hand in creating them.

Argie 10 built by 2 young brothers while Dad was away

We have designs that are well-suited to building in small and cozy spaces. Some of these boats have been built in bedrooms or dining rooms, even apartments or basements that have only standard doors through which to remove them when completed. They can be built with basic hand tools; you dont need a well-outfitted workshop nor to be a woodworking craftsman to produce a small boat of which you can be proud.

Louis de Lassus built his Argie 15 in his Paris basement

The plans to kick off a project like this make a good Christmas present, whether for a husband or one of the children. If this is your plan, please order soon to ensure that you have the package before Christmas. We will soon be closed for a few weeks and will not be able to supply from 10th December through to 14th January.

To see our full range of designs, please go to http://dixdesign.com/ and our pricelist.

Do you find information about Boat Plans Arch Davis are you looking for? If not, below may help you find more information about the Boat Plans Arch Davis. Thank you for visiting, have a great day.

Read more

Boat Plans Stitch And Glue | My love affair with Hogfishes

Boat Plans Stitch And Glue

 People always ask what is a Hogfish and why would you name your boat after one.

When I first sailed to the Bahamas in 1977 spearing a Hogfish was the most sought after goal of all boaters as they are the best tasting fish around. They can be speared relatively easily if they have never been approached before. If they have been shot at and you missed then they can be a challenge to get near for a kill shot. You have to have a kill shot if using a Hawaiian sling or you will loose your spear. 

Spearing them with a pole spear you can just hang on to the rubber and get towed about if your shot is in a solid spot. This has been lots of fun over the years for me.

When I first designed and built the original Hogfish sailing Sharpie yawl I knew it was going to be a different looking sailboat than the norm. I wanted a boat that just fit me with my type of sailing, cruising and lifestyle. With this in mind I needed a good name to go with this new boat. The Hogfish is a goofy looking fish when swimming about the bottom. I has a fearsome looking mouth but these fish are really just big Wrasses that eat crabs, sea biscuits and what ever comes their way. They can change their

body colors in an instant to camouflage themshelfs. When they die they can be very beautiful, like a sunset. 

Following are some pictures of my carved Hogfish and others that have crossed my path.

Carved for Kim Sands in Abaco out of cedar

Carved from a mahogany tree that washed ashore on Powell Cay in Abaco for an American client.

Carved for Dale and Mandy Roberts in Abaco 22 years ago

A female. All Hogfishes are transsexual where as the dominate female will turn into a male and grow the long snout and take over the female harem. I wonder how all the Christian male homophobic spear-fisherman deal with this fact. Can the fish just decide not to change at any time?

About as big as they get.

A stylized one for Bill Hutcherson

Our house with a neighbor. I love the colors here in this shot.

Mahogany with copper "Spriggs" as they call the three dorsale fins here in Spanish Wells. I have seen up to four at times.

Rachel on our front porch awhile back. The trees and bushes are now 10 higher. Our neighbors that have just built a house next door are always asking us to cut them down saying they are blocking their view. Some people want to sit in the front row and still be able to look at everything on both sides. We just smile at them knowing that all our grey water from our house is watering these native plants that give us shade, privacy, protection from storms and give a place for all the creatures that inhabit them to live. Our neighbours have cut 80% of their trees and bushes down replacing it with grass.

Kalessin with a Hogfish I speared in Exuma 23 years ago free diving in 45 of water. I have used a tracing of this fish for all the carvings you see here.

Back in my ole spear fishing for a living days.

Made of crab wood I found in Bequia a while back. Now in the home of Theo and Kims in Spanish Wells.

When I designed and built the original Hogfish sailing Yawl I wrote a note to myself naming my design company " Hogfish Designs". This was 26 years ago. I knew back then that the hogfish was going to some day be the "it" fish. I mailed this to myself and keep this  unopened letter as a sort of copyright time frame of when I thought it was cool for me to sail about the Carribean sea in a boat with a huge pink stripe down the side calling itself the "Hogfish".

I like to think I made it easier for men to now wear bright colors .

Do you find information about Boat Plans Stitch And Glue are you looking for? If not, below may help you find more information about the Boat Plans Stitch And Glue. Thank you for visiting, have a great day.

Read more