Canoe Boat Plans | Black Cat in the Governors Cup Race

Canoe Boat Plans

In my last post I wrote about how well the Didi 38 "Black Cat" was faring in the Governors Cup Race to the South Atlantic island of St Helena. I am writing this post based on information that I have read on the official web sites of the race and False Bay Yacht Club.

They were going like a train in showing the way to all of the monohulls. Then they sailed into a hole in the otherwise good tradewind sailing breezes. This was created by a rather odd shape to the South Atlantic high, as an elongated sausage running east/west and in two parallel bands of calm not far apart.

Skipper Dave (Wavy) Immelman was kicking himself for having missed a crucial weather download that may have helped him evade the holes. They sailed slowly through the first calm then the winds started to pick up and they thought they were through, only to be trapped by the second calm.

"Black Cat" rounding the Cape of Good Hope en-route to St Helena.

We watched in dismay as the Vickers 41 "Avanti" sailed a big arc that took her right around the hole in which "Black Cat" languished, at pretty much twice the speed. We despaired for the chances of "Black Cat" even catching "Avanti" before the finish line, let alone getting far enough ahead to beat her on handicap. In the end "Avanti" crossed the finish line about 7 hours 10 minutes ahead of "Black Cat".

I went to bed last night feeling sad that the hard sailing done by Wavy and his crew for so much of the race was thwarted by the fickle winds. I woke this morning to the news that the skipper of "Avanti" declared some time after finishing that they had motored and were dropping down to the cruising division. That leaves "Black Cat" as the likely winner of the racing division, with only "Iechyd Da" with a very distant chance of beating her on handicap.

Congratulations to Wavy and crew. You sailed an honest and honourable race. You didnt deserve the heartache that came from watching your opposition apparently sailing right around you when they had actually motored into a more favourable position.

This brings up two questions that need clarification.

1. Why did "Avanti" wait until after the finish of the race to declare that they motored? They should have done so immediately that the motor was started. That action disqualified them from the racing division. They didnt declare at the time that they were dropping to the cruising division, so can they be considered to have been racing in that division? None of the other cruisers knew that they were racing against "Avanti" so they couldnt take her into consideration in their tactical decisions. The knowledge may not have had any effect but it should have been open knowledge throughout the fleet within hours of "Avanti" starting her motor.
2. What is the sense of allowing boats to change their racing division on the water? It may have seemed a good idea at the time that the rules were written but has created a very unfair situation on the water, unfair to those boats that were in the cruising division at the start of the race. The entry list shows 9 boats in the racing division and 4 in cruising. As the race has progressed and the boats ran out of wind, racing boats have chosen to motor and change from racing to cruising division. The leading boat in cruising division changed class after finishing and the 2nd boat changed very late in the race. The whole balance of the event has changed, with the original 9 racers reduced to 3 and the original 4 cruisers swelled to 10 boats. Three of those 4 cruisers have retired and "Tallulah" should get the trophy. Instead she is lying 3rd, with "Avanti" and "Strumpet" having jumped in ahead of her. Maybe the rules of the race have not been broken but I dont agree that this is the right way to do it, in the interests of fairness to all on the water.

OK, I am getting off my soapbox now.Once again, congratulations to Wavy and crew on sticking it out in racing division when it looked like you had been beaten but could have had a clear win in the cruising division by simply starting your motor and changing classes.

See more about the Didi 38 and our other designs on our website at http://dixdesign.com/.



Do you find information about Canoe Boat Plans are you looking for? If not, below may help you find more information about the Canoe Boat Plans. Thank you for visiting, have a great day.

Read more

Boat Plans Aluminum | Of Camels Boats Dunes and Things

Boat Plans Aluminum

We all learn in school about the "ship of the desert", the much maligned camel. These animals and their owners are totally adapted to living on and cruising the undulating surface of the desert. We also know of the traditional boats of the Arab world, the dhows that are seen in both power and sail versions. These are very seaworthy boats and have done extensive voyages.

Not heard of nearly as often in that part of the world is the construction of a modern high performance yacht. Such a construction project is the Didi Mini Mk3 of Hugo Vanderschaegh, proceeding apace in Dubai. This is a Mini 650 racer that is built from plywood. Designed primarily for amateur builders, this one is being built by professionals. The photos below show the hull with all flat sheets fitted and the radius skin starting, through to hull turning.

This boat is being built from a CNC kit that was supplied by our Cape Town kit supplier, CKD Boats. They are able to supply kits for most of our radius chine plywood designs as well as the classically-styled lapstrake designs.

Didi Mini Mk3, flat panels completed and 1st layer of radius starting.

2nd layer of radius almost finished.

Didi Mini Mk3 hull skin completed.

Clean and powerful stern sections.

Completed hull ready to turn over.

They turned Hugos hull right-way-up last week and recorded it on time-lapse video. They accomplished it with plenty of helping hands and no mechanical equipment. This is a wide boat, at 3m beam, so it towers above the men providing the muscle power. It worked in their situation with lots of hands but "dont try this at home". For the average builder it is better and safer to use mechanical equipment to raise one side under control then lower it again on the other side.

You can see more of his Didi Mini Mk3 project on Hugos website and follow future progress. Also visit our website at http://dixdesign.com/ to read more about our range of designs and available kits for our plywood boats.

Do you find information about Boat Plans Aluminum are you looking for? If not, below may help you find more information about the Boat Plans Aluminum. Thank you for visiting, have a great day.

Read more