Boat Plans Arch Davis | Didi Sport 15 DS15 Launch

Boat Plans Arch Davis

The long-awaited day arrived this weekend. Jim Foot, in Port Elizabeth, South Africa, launched his self-built DS15 at Algoa Bay Yacht Club. He started with a pre-cut plywood kit supplied by CKD Boats in Cape Town and took approximately 6 months of his spare time from start to launch.

DS15 "Bateleur" about to get wet for the first time.

 Despite the very light wind, they had good sailing and were impressed by performance. Jims first comments are:-

She sails beautifully and she is fast. Beating into a chop in light wind this am going at about 3,7 kts felt happy. Then was told wind spd 4 kts by passing boat quite amazing.

Very well behaved. No balance issues. Save a bit of lee helm with the kite up. Loads of compliments from older sailors. Hunter Gall get on the water you dont know what you are missing. This is one good boat. Ps only sailed in bulb config at this stage.
A few changes to make. But not many. Congrats Dudley on a fantastic hull. Its a beaut.

Ready for sails and rarin to go.

Rigging the sails. Clean deck layout and large cockpit.

Jims friend Mark Dawson was with him for the first sail and passed these comments:-

Lucky enough to be the first to sail this boat with James Norman Foot. What a beaut! After a hairy moment of rocking the boat to moorings, which became a desperate paddle when we started drifting towards the rocks, we rigged the sails and immediately accelerated away. Bateleur likes to sit flat and notably accelerate in the lightest of wind puffs. A forced capsized showed how stable she is and how literally effortless to bring her back. Sailing the Didi 15, I just want to go again. Cant wait to see her in stronger breeze. In summary...I need one.

"Bateleur" returning to ABYC with a very happy crew.

Jim will keep us up to date with his testing and fine-tuning over the next few weeks. I hope that we will also get to see some photos and videos in stronger winds as Jim and "Bateleur" grow to know each other.

The top photo of this post shows the hull shape very nicely. For those who have not followed my posts about the build, this is a plywood boat although it doesnt look like one. It is the smallest in our radius chine plywood Didi design range. The hull is the same family as the Didi Mini Mk3 and Didi 950, with topside chine above a radius chine underbody.

It can be built from plans only, plans and patterns or plans and a CNC kit. See more info about all of our designs on our website at http://dixdesign.com/

Do you find information about Boat Plans Arch Davis are you looking for? If not, below may help you find more information about the Boat Plans Arch Davis. Thank you for visiting, have a great day.

Read more

Boat Plans For A Chesapeake Deadrise | Didi Cruise Mini available in UK

Boat Plans For A Chesapeake Deadrise

The Sail 4 Cancer charity in UK has a Didi Cruise-Mini that has been donated to their cause and is available for sale. This is a cruising version of the Didi Mini Mk2, with a lifting keel and reduced rig, as well as more headroom. It is a small performance cruiser in the image of the Mini 650 trans-Atlantic racers.

Didi Cruise-Mini, a sleek little performance cruiser.

I sailed one of these boats recently on Puget Sound when I was there for the Wooden Boat Festival. She proved to be a speedy little cruiser with delightful manners. She handled beautifully, carries her rig very well and has comfortable accommodation for weekending or short holidays afloat. We sailed past everything under sail that we saw on the water, sailing higher and faster. This was despite towing a clinker dinghy that was almost as long as she was. We had no desire to tow the dinghy but it was also destined for the Wooden Boat Festival and dragging along behind us was the simplest way to get there.

Twin rudders and lifting keel give access to shallow anchorages.

This boat that is available is in the Hamble yard of Boatshed, in the charge of Peter Delbridge. Anyone interested in it can contact Peter at the email address (peter at boatshedhamble dot com). It was built as a rehabilitation project by a man who was recovering from a serious illness. He completed the boat, sailed it once then donated it to Sail 4 Cancer when he moved abroad and could not take the boat with him.

Lifting bulb keel, excellent stability with shallow draught.

It is a complete boat, with all hardware and sails, ready for coastal cruising. The lifting bulb keel and twin rudders will get her into shallow anchorages that are inaccessible to larger or deeper-draught boats.

Swept spreader rig for easy handling, less complication than a Mini 650 rig.

100% of the selling price will be donated to Sail 4 Cancer (less yard fees etc), a UK charity that provides water based respite services for families affected by cancer. This is an excellent opportunity to buy a boat at a very affordable price and benefit a worthwhile charity at the same time.

Efficient cockpit with cuddy for shelter when on watch.

She is priced to sell, at £6,000 and well worth a look to see if she may suit you.

To see more of this and our other designs, visit http://dixdesign.com/.

Do you find information about Boat Plans For A Chesapeake Deadrise are you looking for? If not, below may help you find more information about the Boat Plans For A Chesapeake Deadrise. Thank you for visiting, have a great day.

Read more

Boat Plans Skiff | DS15 Didi Sport 15 Build in South Africa

Boat Plans Skiff

Until now I have only shown the DS15 prototype, being built in Virginia Beach, USA, by Aussie Hunter Gall. Hunters project is currently stalled due to circumstances but one of the the other builds is steaming ahead apace. This one is being built by Jim Foot in Port Elizabeth, South Africa. This weekend Jim applied the last coat of epoxy to the outside of his hull and is preparing to paint it.

This series of photos shows the basics of Jims project up to this stage. This is a radius chine plywood design, with hard chine along the topsides. It is the same family of designs as the Didi Mini Mk3 and Didi 950.

Frames set up on building stocks, with stringers going on.

Stringers all done and bottom panels fitted.

Same stage, showing stringers running into forefoot.

Side panels fitted and first layer of radius progressing.

Stitch-&-glue detail of topside chine.

Second layer of radius going over first layer.

Completed radius chine, running smoothly into flat panels.

Glass taping centreline seam. Jigsaw joints of bottom panel can be seen.

Epoxy coatings started.

Nice finish starting to show.

Clean stern and nice finish.

Final coat of epoxy, ready for sanding and painting.

I will show more of Jim Foots project as it progresses toward launch date. I tend to show the projects for which I receive the best photos, so please send me your best pics if you want to see your project on this blog or the Dudley Dix Yacht Design main website.

Do you find information about Boat Plans Skiff are you looking for? If not, below may help you find more information about the Boat Plans Skiff. Thank you for visiting, have a great day.

Read more

Boat Building Plans And Kits | Dix 470 Catamaran Kit Build in UK

Boat Building Plans And Kits

Kevin Bream is the owner of Exocetus Catamaran Kits in UK, the company that he formed to develop kits for our plywood catamaran designs and to market them to builders, both professional and amateur. To be sure that he does a proper job of this, he is building the Dix 470 himself, to test the fit of all parts and to develop systems to ease the whole construction process.

The number of plywood components in a boat like this is massive. Just the thought of figuring the size and shape for each one, then cutting it out before fitting it in place on the boat, can make the project being contemplated seem very intimidating. Anything that can be done to reduce the number of hours in the build and the flow of elbow grease from builder into the boat is worthy of consideration. It reduces building time for any kind of builder. For a boatyard it increases profits and for the amateur it gets him afloat and sailing sooner.

Kevin Bream has one hull completed and is now working on the second. Lessons that he learned while building the first hull have been put into making a better product. Aside from that, anyone who buys a kit from Exocetus will benefit from a product that has been built by the supplier himself. Who could provide better backup support to the builders than he who has done the development, the cutting and the building before them?

Here are recent photos of the project.

The workshop of Exocetus Catamaran Kits, first hull on the right.

Completed Dix 470 starboard hull, waiting for its mate.

Self-jigging building stocks, bolted to the concrete slab.

Interlocking bulkheads & backbone assembled, stringers in progress.

Daggerboard casing. This boat can have cruising keels or daggerboards.

Skeleton of port hull, ready for skin. The jigsaw joints are visible at panel edges.

Skeleton with side skin being dry-fitted to test for proper fit.

Stern detail of starboard hull, showing swim platform.

Exocetus Catamaran Kits can also supply similar kits for the bigger sister, the DH550.

To see more about these designs, as well as others of all types and materials, please visit http://dixdesign.com/

Do you find information about Boat Building Plans And Kits are you looking for? If not, below may help you find more information about the Boat Building Plans And Kits. Thank you for visiting, have a great day.

Read more